Update on hardware for the experiments.

The below is the email that Mr Rosenthal and I exchanged.

Dear Chris: The pulse to the conditioning coil was the single discharge of a capacitor affected by using a large SCR that was triggered at the zero crossing of the sine wave being supplied to the output coils placed between the magnets. The output coils were bifilar wound. Walt

I finished the winding of the resonant coil today also. The weight of the resonant coil is 5.4 Kg it is 1.4 gauge enamelled wire with a resistance of 4.1 ohms. Winding this sized wire by hand and when it is this sort of weight was under estimated in time and blisters on my hands.

This picture is of the  new Variac that will allow a varied charge to go to the capacitors for the conditioning pulse. The Variac is rated at 4 Amps. I bought some heavy duty Capacitors today as well.

This picture is of the Variac from the top. The Varac is heavy and a a pretty decent size.

This picture is of the newly wound Resonant coil. The weight of the resonant coil is 5.4 Kg it is 1.4 gauge enameled wire with a resistance of 4.1 ohms.